9-4-2007
Stan's Fast Clock
Version 5.6
NEW!
Save Session End Time For Use As Next Start Time
Full Support For Both 12-Hour and 24 Hour Time

Click a picture to see a larger view
 |
This program displays a clock on your desktop or laptop computer which can run up to twenty-four times faster than real-time.
This is useful for simulating lengthy operations within a manageable period of time.
You can choose either analog or digital time displays.
|  |
 |
The clock faces shown at the left are just three of the eighteen analog clock faces available.
All of the analog clock faces can be viewed at the bottom of this screen. You can easily modify the clock hands for any
clock face, and even install your own custom clock faces.
|  |
 |
At the right are three of the five digital clock faces provided with the program. The top two clocks are shown operating in the Fast Clock mode
while the bottom clock is shown operating in the Timer mode.
All five digital clock displays are provided in the base program, and all may be used either in the Fast Clock or Timer modes.
|  |
Model Railroad News published a review of my software in the February 2006 issue. Read the review here.
TIPS:
Uninstall any older version before installing this version.
If the clock faces don't display properly, make sure the system font size is set to Normal.
After starting the program, please read Help|Information...
Answers to frequently asked questions can be found at FAQs
Please contact me at Stan@StansTrains.com if you have any questions or problems.
Program requirements: Windows 95 or later.
The program occupies the entire computer screen at resolutions of 800 x 600 pixels, 1024 x 768 pixels and 1280 x 1024 pixels. The program supports many
other resolutions at a reduced size
All available analog clock faces - Click to see a large view
Unzip the downloaded file into a temporary directory, double click on setup.exe and follow the instructions. Please read the TIPS above.
Clock Face Pack download instructions: Unzip the downloaded file into a temporary directory.
Copy all of the resulting files into the same directory you installed Fast Clock into.
The program will automatically recognize the new clock faces.
Please contact me at Stan@StansTrains.com if you have any questions or problems.